Jindal Column Pipes & its Fittings in Chennai, Tamilnadu, Kerala, Telengana, Karnataka, Andhra Pradesh

  • About
  • Applications
  • FAQs
  • Distributors
  • Contact us

About:

JINDAL COLUMN PIPES

Jindal Column Pipes

Konkraft Enterprises are distributors of Jindal Column Pipes in Chennai, Tamilnadu, Kerala, Telengana, Karnataka, Andhra Pradesh.

Our uPVC Column Pipes are specially designed for submersible pumps. These uPVC Column Pipes blend the perfect combination of technology and quality that guarantees a long hassle-free performance. These uPVC Column Pipes are a perfect replacement of galvanized steel pipes used for column application. Stringent quality is checked at every stage of production and ensuring the highest standards, which forms the ball mark of these uPVC Column Pipes.

We offer a quality imbibed range of uPVC Column Pipes that have minimum frictional losses and thus save the pumping cost. These are widely reckoned by our clients for its features such as corrosion resistant, easy to install and light weight. 

M/S. Konkraft Enterprises™ lists the following applications of Jindal uPVC Column Pipe:

Applications of Jindal uPVC Column Pipes

  • Portable Water Supply Schemes
  • Domestic & Industrial Plumbing
  • Lift & Gravity Irrigation Systems
  • Chemical Transportation
  • Agriculture Pumpset, Suction & Delivery Pipes
  • Horticultural & Green House Technology

Salient features of uPVC Column Pipes

  • Long life & low maintenance
  • No contamination due to incrustation or corrosion
  • Leak proof joints
  • Low cost in comparison to G.I & C.I. Pipes
  • Easy in installation
  • Minimum frictional losses thus saving in pumping cost
  • 25 % higher discharge rate than G.I. Pipes
  • Fire resistant, non conductor of electricity & low thermal conductivity
  • Economical
  • Negligible maintenance & Longer Life
  • Smooth bore, hence excellent flow properties
  • High impact strength
  • The grip design of Square Type Threads gives a high tensile load capacity and for easy fitment and re-fitment

Faq

FREQUENTLY ASKED QUESTIONS

In case of installation of For Raising Main Pipe/Column Pipe/Drop Pipe/Riser Pipe for Submersible Pumps
Q.What is the life span of uPVC pipes?
Under proper usage conditions and storage away from sunlight the uPVC pipes in India have shown a life span of more than 50 years. 

Q.What are the benefits of uPVC pipes?
Savings on(a) cost of pipes,(b) Handling time,(c) power & get more water upto 30%.(d) Working life of pipes is much more.

Q.How does it affect on the quantity and quality of water?
We get more water. Over a period of use, the steel pipes since there is no corrosion throughout length of column pipes the water quality remains good & fresh forever.

Q.Why only Jindal uPVC pipes?
Jindal group is the leading PVC pipe manufacturer in the country since 1975. They are the first to pioneer & develop the technology and to make threaded uPVC Column pipes in the world. Jindal Pipes is an ISO 9001-2000 Company. it has innovated & developed several new products to suit the farmers & customers requirements and these products are well accepted across the country and is well represented all over the country by a strong network of dealers and distributors to ensure proper sales and service. 

Q.Can uPVc pipes strength be compared to a steel pipe?
The specific gravity of uPVC is1.4-1.45gm/cm3 where as that as steel has 8gm/cm. Taking the strength of the material into consideration, the pipes are optimally designed to make them light without any compromise in its strength .

Q.Can these pipes take the load of the pump? 
Jindal column pipes are designed to hold several times the weight of entire column filled water& pump assembly. All the type of different sizes has been considered and the Jindal column pipes are made accordingly in the class of V4, medium, crystal, standard& heavy and Super Heavy.

Q.Upto what depth the pipes can be lowered?
The pipes may be used after careful selection based on pump delivery head & maximum allowable pressure in the pipes. The depth of the bore well may differ from place to place depending upon the water level in the bore well. Jindal offers a range of pipes to suit the customer requirement of various depths & they have been successfully used for Super Heavy up till 1200ft. Proper selection of Jindal pipes can be made for various depth applications after carefully study of our technical booklet.

Q.Do column pipes need full casing in the bore?
These pipes give the best service in bore wells which have full casing or bore wells which are free of loose boulders & stones. In areas where boulders & stones are prevalent, then full casing or slightly larger bore should be made so that the pump does not get stuck 

Q.What should be the bore size with respect to the pump outside diameter? 
For bore wells without casing pipe and especially in areas with loose boulders present in the bore, it is suggested that the bore well size should be minimum more than the pump outer diameter. This is to prevent pump stuck-up due to small pebbles .For bore wells with casing, a minimum of frac of inch gap between the Casing internal diameter and the pump's outer diameter, is required.

Q.How to choose from the range of pipes offered?
Right selection of pipes can be made after consulting technical leaflets on the basis of pump& pipe discharge pressure.

Q.There is variation in thickness of the pipes. Why?
The pipe thickness of the barrel has been designed by taking the pump weight, water column weight and pump delivery pressure into consideration. The end of the pipes are made thicker so that even after making the threads and removal of material, the same barrel thickness remains under the threads so that the strength of pipe can be maintained equally at the ends of the barrel.

Q.Are the pipes breakable?
No, the pipes do not break under normal handling conditions.

Q.What happens if a bore collapse?
The pump & the pipe can be pulled out safely only in cases. In case of several bore collapse & boulder problems even steel pipes along with the pump cannot be retrieved from the bore.

Q.What about after sales service?
District level dealers are fully equipped& have trained mechanics for correct installation of pipes. These mechanics are always available for all types of service support. 

Q.Is tripod required for lowering?
Yes, tripod is required specifically for use of column pipes in the installation of V6 & V8 PUMP sets, considering the heavy load requirements .However, it is important to note that handling of uPVC pipes is much simpler in comparison to steel pipes.

Q.How to tighten the pipes?
The pipe is tightened on the principle of screw system. Tighten the pipe with hand & rope (holding the coupler) so that the rubber seal fully enters into the coupling pipe. Total description of fitment is provided in the company installation booklet.

Q.Any adhesives required during joining of pipes?
No solvent or adhesives is required.

Q.Do we need extra rope to hold the pipes?
No rope is required .The pipes have adequate strength.

Q.Can we cut the pipes?
No. Pipes cannot be cut for short length requirement. Special request can be made to the company for shorter lengths. The company does, however, stock shorter length of 1.5m of few standard running sizes, which can be made available on demand.

Q.Can we re-thread the pipes?
Under normal use, re-threading of pipe will not be required. Special threads cannot be made at site.

Q.Can metal pipes join with uPVC pipes?
Metal pipe can be connected with the uPVC only with use of APPL marked adaptors which are made by Jindal Pipes.

Q.Can we use any other metal adaptors?
The quality of APPL marked adaptors are carefully checked in the lab for(a) Value of hardness, (b) Quality of casting,(c) Blow holes and other casting defects,(d) Sufficient thickness &(e) properly designed threads.

Q.Why to use pump guard?
Areas with excessive sand pumping or defective unbalanced pump, results in excessive vibration in the bottom which may lead to pipe breakage near the adaptor. Pump guard has been designed to be used in these types of areas & so that even after breakage of column pipes, the pump is easily retrievable.

Q.How to select a top adaptor?
Top adaptors with flange are generally used in deep bore wells so that the flange on top may be used as a support to hold the column with even higher depth & bigger pump assembly. With even higher depth & bigger pump assembly. Top adaptor flange type with double coupling length can be used so that two pipe clamps can be used on top to support the column load. For low depth bore well, top adaptor without flange may be used. 

Q.Why only Jindal column pipes? 
Only Jindal has the correct Technology & understands the requirements for the development of uPVC column pipes. This product is our child. It has been designed & developed over 30 years after considerable R&D by the Jindal team after consideration R&D and more than 30 years of expertise by the APPL team. All other manufacturers who are trying to copy the product do not understand the basics and the technicality of the design which may lead to severe failure & create problems for the customer in the long run. Since, this is an engineered product, other uPVC pipes manufacturers may not have the capability of meeting the desired design specifications required in Column pipes for making Column pipes.

Q.What makes Jindal "Always first? Always best? "
Jindal has more than 30 years of expertise in the field of PVC pipe processing. The team of Jindal comprises of a fully dedicated Engineering department to cater to the engineering needs of the product .This product has been conceived, designed, developed & marketed in India and abroad for the first time by Jindal. Jindal understands the customer requirements and converts them into products, which have proven track record & mass acceptance in India and in several other countries. Hence it is suggested that only APPL marked accessories, supplied by Jindal, should be used for all your requirements.

Wanted Distributors, Dealers, Associates for Jindal Column Pipes in South India

Wanted Distributors, Dealers, Associates for Jindal Column Pipes in Karnataka

Belgaum, Mysore, Tumkur, Gulbarga, Bellary, Bijapur, Dakshina Kannada, Davanagere, Raichur, Bagalkot, Dharwad, Mandya, Hassan, Shimoga, Bidar, Chitradurga, Haveri, Kolar, Bangalore, Uttara Kannada, Koppal, Chikkaballapura, Bangalore Rural, Udupi, Yadgir, Chikmagalur, Ramanagara, Gadag, Chamarajanagar, Kodagu

Wanted Distributors, Dealers, Associates for Jindal Column Pipes in Andhra Pradesh

Anantapur, Chittoor, East Godavari, Guntur, Kadapa, Krishna, Kurnool, Prakasam, Srikakulam, Visakhapatnam, Vizianagaram, West Godavari

Wanted Distributors, Dealers, Associates for Jindal Column Pipes in Telengana

Adilabad, Hyderabad, Karimnagar, Khammam, Mahaboobnagar, Medak, Nalgonda, Nizamabad, Rangareddy, Warangal

Wanted Distributors, Dealers, Associates for Jindal Column Pipes in Tamil Nadu

Kancheepuram, Vellore, Thiruvallur, Salem, Viluppuram, Tirunelveli, Madurai, Tiruchirappalli, Cuddalore, Tiruppur, Tiruvannamalai, Thanjavur, Erode, Dindigul, Virudhunagar, Krishnagiri, Kanniyakumari, Thoothukkudi, Namakkal, Pudukkottai, Nagapattinam, Dharmapuri, Ramanathapuram, Sivaganga, Thiruvarur, Theni, Karur, Ariyalur, The Nilgiris, Perambalur

Wanted Distributors, Dealers, Associates for Jindal Column Pipes in Kerala

Malappuram, Thiruvananthapuram, Ernakulam, Thrissur, Kozhikode, Palakkad, Kollam, Kannur, Alappuzha, Kottayam, Kasaragod, Pathanamthitta, Idukki, Wayanad

Wanted Distributors, Dealers, Associates for Jindal Column Pipes in Pondicherry

Puducherry

Distributors, Dealers, Associates Wanted for Jindal Column Pipes in South India

We need Distributors, Dealers and Associates for Jindal Column Pipes with having previous experience of trading construction based materials and / or Direct Marketing Distribution will be preferred all over Tamilnadu, Kerala, Karnataka, Andhra Pradesh, Telengana, Pondicherry.

Head Office

M/S. Konkraft Enterprises™
133 MIG NH1,
Vallal Nalliyakodan St,
Maraimalai Nagar
Kancheepuram Dst – 603209.
Contact:
Sales  +91 72002 28883, +91 81483 99165

Email: info@konkraft.in

Coimbatore:
The Gallerium
No: B-28, 1st Floor
Puliyakulam Main Road
Opp. Carmel Garden School
Coimbatore - 641 045

Salem:
King Traders
Mr. Gobi Chandru

Karaikudi:
KVP Infrastructures:

NO-29, Behind E.B. Office, Kalanivasal New Street,
Karaikudi - 630 002.

Contact Person

Mr.Marx Ramachandran

Erode:
Contact Person

Mr.Boopalan.P
 

Chennai

Asha Enterprises
No. 43, Raghavan Street,
Perambur, Chennai – 600 011.
Contact: C. Nishath

South Chennai

Arul Raja Energy Management Consultant
No. 84, Thiyagaraja Nagar, Venkatamangalam,
Ponmar, Chennai – 600 127.
Contact: Mathan Raja

Koyambedu

SKL Infrastructure Pvt Ltd
No. 3, Thiruveedhi Amman Koil Street,
Koyambedu, Chennai – 600 107.
Contact: Geno

Anna Nagar

SKL Infrastructure Pvt Ltd
W-54, IIIrd main road,
Anna Nagar, Chennai – 600 040.
Contact: Gasper

Content

Feedback

 

Name

Email

Comment