Jindal MLC Pipes & Fittings

  • About
  • Gallery
  • Applications
  • Products
  • Approvals
  • Comparison
  • Contact us

About:

Composite Pipes

Konkraft Enterprises are traders of Jindal MLC Pipes, associated Fittings, Tools & Accessories in Tamil Nadu. Multi Layer Composite (MLC) pipes being produced with IS:15450 standards. Composite Pipes combine the advantages of metal and plastic pipes and eliminate the disadvantages of both materials at the same time.

The aluminium core is absolutely diffusion tight and reliably prevents oxygen or gases from permeating into the pipe. These Pipes consist of an overlapped aluminium core with an inner and outer layer of polyethylene - PE. All the layers are permanently bonded together by intermediate adhesive layers.

Jindal MLC Pipes

Advantages of Jindal MLC

  • 50 years working Life
  • 30% more flow rate than Metal Pipes
  • Corrosion resistant
  • Hygienic, Toxic Free, Rust Free
  • Working Temp Range -40°C TO 95°C
  • Scale Resistant
  • No Oxygen Permeability
  • Low Thermal Conductivity
  • No growth of micro Organisms
  • Low Heat Expansion
  • Fire Resistant
  • Light Weight – easy to carry and store
  • Faster Installation
  • Resistant to Chemicals
  • Malleable–easily formed and set by hand
  • Bendable hence less joints

Gallery:

Jindal MLC Site Photos

Jindal MLC Pipes & Fittings

M/S. Konkraft Enterprises™ lists the following applications of Jindal MLC Pipes:

  • Cold & hot water Plumbing & distribution
  • Under floor heating System
  • Solar Water Heating System
  • Jet pump piping, submersible pump piping
  • Pneumatics, compressed air in textile, automotive industry.
  • Medical, Foodstuff & Chemical Industry's Pipe System
  • LPG & Natural gas distribution Vacuum Systems
  • Insecticides spraying
  • Radiator Central heating
  • Cable conduits
  • Diesel, petrol & Petroleum products
  • Central air conditioning and blower
  • Refrigerant systems
  • Data transmission and Telecom

Cold and hot water distribution

The smooth inner layer of Jindal MLC pipes prevent deposit, accumulation and corrosion leading up to 30% more flow of fluid than in metal pipes. They are easy to bend & install directly on girder or inside wall and cement concrete. They can be easily found with a simple metal detector. The combination of plastic and metal makes Jindal MLC pipes a permanently reliable system for its use in all common hot and cold water installations.

Under floor heating distribution

Stable form in bends and over a distance; Jindal MLC pipes can be directly installed up to 200 meters without any fittings. It works well in a wide range of temperature from -40°C to 95°C

Gas and air distribution

The aluminium layer allows Jindal MLC pipes to withstand high working pressure and prevent oxygen and gases from permeating into the pipe. They are easily bent, which makes the use of numerous fittings unnecessary. Jindal MLC pipes are safe and reliable choice for compressed air, gas and oxygen supply

Medical, foodstuff, and chemical industry’s pipe systems.

The inner and outer layers of Jindal MLC pipes are made of special PE with strong chemical, corrosion and contamination resistance. The aluminium core makes the pipe 100% gas and oxygen tight. Therefore, as medical and oxygen supply pipe, Jindal MLC pipe is hygienic and leak-proof and ensures the purity of its carrying media. As a supply pipe for food industry, it can eliminate contamination during manufacturing. Furthermore, the static-free PE layers can also withstand all kinds of acid and alkali solution (in density) below 60°C, which enables the pipe to be used in the chemical industry with no extra protection.

Solar, Air Conditioning and Refrigeration

Jindal MLC Pipe is a bad conductor of heat. Thermal conductivity is 0.45 watt/[m deg k.] so thermal preservation is high. This lowers the cost of temperature keeping and improves the efficiency of these systems

Data transmission and Telecom

Composite pipes are very effective as conduit compared to other pipes. Its uniqueness is in its three-layer construction, incorporating a welded sealed aluminium tube providing the very latest method of EMi screening covered both internally & externally with a layer of polyethylene. This gives the comparable strength to that of a metal conduit with the flexibility of a plastic conduit. Jindal MLC Pipe is designed to absorb and reflect emitted radiation from sources of interference, whereby with an attenuation of 80dB would reduce the resultant field within the composite pipe by a factor of 10000

Pipes

JIndal MLC Pipes

Pipe A (White) – HDPE, for Cold water distribution, Temp. -40ºC to 60ºC,

Pipe B (Orange) – MDPE / PE-RT, for hot water distribution, temp -40ºC to 95ºC

Pipe C (Yellow) – HDPE, for oxygen and gas supply, temp -20ºC to 50ºC

Pipe UV (Black) – HDPE / PE-RT, for hot water distribution, temp -40ºC to 95ºC

Screw Fittings

Screw Fittings

Compression Fittings combine the positive feature of high reliability with a simple installation technique. The fittings do not require any special tools. The permanent pipe joint is achieved by compression i.e. by tightening the nut against the coned-shaped olive.

  • Advantages of Screw Fittings

    * Developed with advance forging technique.
    * Easy and convenient installation.
    * Optimized structure design.

Com Fit

Compression Fittings

Com-Fit, the new innovation from Jindal for its Multilayer Composite Pipe is a new generation composite compression fitting system made from NSF approved grade of Nylon Glass Filled for potable water supply. These high quality nylon fittings combine the advantages of both metal and plastic yet prove to be very cost-effective. Recommended for both hot and cold water supply as well as Chemicals & Foodstuff, these fittings are designed for easy handling and fast connections.

Crimp Fit

Jindal Crimp Fittings

Crimp-Fit, the new innovation from Jindal for its Multilayer
Composite Pipe is a new generation crimp fitting system made from NSF approved grade of Nylon Glass Filled Material suitable for potable water supply. These high quality nylon fittings combine the advantages of both metal and plastic yet prove to be very cost-effective. Recommended for both hot and cold water supply as well as Chemicals & Foodstuff, these fittings are designed for easy handling and fast connections.

Tools & accessories

  • Bending Spring
  • Pipe Cutters
  • Crimping Tools

Description: http://www.jindalpex.com/full-images/pipe-installation-tools-791400.jpg

Jindal Pipe Cutting Tool

Jindal Tool

Jindal Crimping tool

Jindal Pipe Cutter

Product Description

Providing the perfect solution for installing pipes, our comprehensive range of Pipe Installation Tools consist of tools offered in various grades and sizes. The high quality standards maintained in this range have made us a reliable Pipe Installation Tools Manufacturer, Exporter and Supplier from India.
Pipe Installation Tools Include

·  Cutter
·  Reamer
·  Bending Springs
·  Bending tools

·  Crimping Tools
·  Eng Plugs
·  Clamps
·  Water ball valves & other accessories

Why our Pipe Installation Tools?

  • Easy to handle
  • High quality
  • Strong grip
  • Assure high performance level

Demanded for

  • Industrial installations
  • Plumbing work
  • Installation of MLC Pipe

Approvals

In India, Composites pipes and fittings are approved by the following organizations:

  • Central Public Works Department (CPWD)
  • Airport Authority Of India (AAI)
  • Haryana Housing Board
  • PHED Haryana
  • Chandigarh Housing Board
  • Public Works Department - Govt. of Tamil Nadu
  • Nuclear Power Corporation of India
  • Department of Atomic Energy - Govt. of India
  • Quality Assurance Department – DGS & D
  • Military Engineering Services
  • Married Accommodation Project ( DG MAP)
  • Brihanmumbai Mahanagarpalika
  • Indian Railways
  • Life Insurance Corporation of India
  • IIT, Chennai
  • BSNL
  • BHAVANI, Kalpakkam
  • Mumbai Municipal Corporation
  • Tirumala Thirupati Devasthanam

Pipe A

International Standards for PE-AL-PE Composite Pipes

  • AUSTRALIA: Standard specifications for PE-AL-PE pressure pipes
  • CANADA: For plumbing products and materials
  • FRANCE: Central heating systems & hot/cold drinking water application
  • GERMANY: Central heating systems & hot/cold drinking water application.
  • ISRAEL: For hot and cold water supply.
  • RUSSIA: For use in construction - cold/hot water supply systems.
  • SOUTH AFRICA: Approval for use in water installations.
  • SWITZERLAND: Central heating systems & hot/cold drinking water application.
  • TAIWAN: For use as hot & cold water works in building industry.
  • UNITED KINGDOM: Approval for water fittings & materials.
  • USA: Standard specifications for PE-AL-PE pressure pipes.
  • INDIA: As per IS 15450: 2004 for Hot and Cold Water Supply

Comparison

Konkraft Enterprises provides you the detailed comparison of Jindal Pipes with other category pipes. A detailed comparison shall be done in person. A few lists are as follows.

Jindal now introduces JINDAL Composite Pipe, made by German technology with an Aluminium core tube bonded by adhesive to the interior and exterior tube layers of Polyethylene (High Density and Medium Density).
This engineered combination of materials provides the strength of metal with the longevity and durability of plastic, all in easily handled and installed system.

Comparison Between Jindal Composite Tubes & other Pipes

Projects / Pipes

Jindal Composite Pipe

All Plastic Pipes

Galvanized Pipes

Materials

PE - AL - PE

PPC or PE or PB

Steel

Working Life

Longest

Longer or long

Short

Hygiene

Best

Good

Bad

Installing

Easy and no contamination

Easy

Difficult and Contamination

Self Weight

Light

Light

Heavy

Packing

Coil

Coil or Straight

Straight

Cutting

Easiest

Easy

Difficult

Connection

Easy

Easier or Easy

Difficult

Shock Resistance

Strong

Normal

Strong

Pressure Resistance

High

Normal

High

Corrosion Resistance

High

High

Bad

Bending

Easy & no spring back

Easy but springs back

No bending

Permeability

No

Oxygen Diffusion

No

Size Stability

High

Low

High

Burning Resistance

Good

Bad

Best

Dealers Wanted for M/S. Konkraft Enterprises™

We need Dealers for M/S. Konkraft Enterprises™ with having previous experience of dealing in Consumer and / or Direct Marketing Distribution will be preferred all over Tamilnadu.

Traders - Jindal MLC Pipes & Fittings

M/S. Konkraft Enterprises™
133 MIG NH1,
Vallal Nalliyakodan St,
Maraimalai Nagar
Kancheepuram Dst – 603209.
Contact:
Sales  +91 72002 28883, +91 81483 99165

Email: info@konkraft.in

Madurai:
Kurinji Motors & Cables, 
Main Road, Seeman Nagar Bus Stop
Karuppayurani, Madurai – 20

Salem:
King Traders
Mr. Gobi Chandru

Karaikudi:
KVP Infrastructures:

NO-29, Behind E.B. Office, Kalanivasal New Street,
Karaikudi - 630 002.

Contact Person

Mr.Marx Ramachandran

Erode:
Contact Person

Mr.Boopalan.P
 

Chennai

Asha Enterprises
No. 43, Raghavan Street,
Perambur, Chennai – 600 011.
Contact: C. Nishath

South Chennai

Arul Raja Energy Management Consultant
No. 84, Thiyagaraja Nagar, Venkatamangalam,
Ponmar, Chennai – 600 127.
Contact: Mathan Raja

Koyambedu

SKL Infrastructure Pvt Ltd
No. 3, Thiruveedhi Amman Koil Street,
Koyambedu, Chennai – 600 107.
Contact: Geno

Anna Nagar

SKL Infrastructure Pvt Ltd
W-54, IIIrd main road,
Anna Nagar, Chennai – 600 040.
Contact: Gasper

Note: Kindly call us to avail dealership in all parts of Chennai, Coimbatore, Trichy, Thanjavur, Salem, Cuddalore, Dharmapuri, Dindigul, Erode, Kancheepuram, Kanniyakumari, Nagercoil, Karur, Krishnagiri, Madurai, Nagapattinam, Namakkal, Perambalur, Pudukottai, Ramanathapuram, Sivagangai, Theni, Nilgiris, Udagamandalam, Thirunelveli, Thiruvallur, Thiruvannamalai, Thiruvarur, Thoothukudi, Tiruchirapalli, Tiruppur, Vellore, Villupuram, Virudhunagar, Sivakasi, Tambaram, T. Nagar, Ponnamallee & Ariyalur.

Content

Feedback

 

Name

Email

Comment